80 lines
2.4 KiB
Markdown
80 lines
2.4 KiB
Markdown
服务器：
|
||
ssh bj-txy
|
||
cd OmniSoketGo
|
||
./bin/kcpserver -listen 0.0.0.0:10909
|
||
|
||
ssh gz-txy
|
||
cd OmniSoketGo
|
||
./bin/kcpserver -mode=relay -listen 0.0.0.0:10909 -relay-remote 172.21.32.15:10909
|
||
|
||
MuJoCo端：
|
||
终端1：
|
||
source /opt/ros/humble/setup.zsh
|
||
export ROS_DOMAIN_ID=10
|
||
cd tienkung-szu/xSIM_MUJOCO
|
||
python scripts/simulator_view_asyn.py -m evt2
|
||
|
||
终端2：
|
||
source /opt/ros/humble/setup.zsh
|
||
export ROS_DOMAIN_ID=10
|
||
cd tienkung-szu/Deploy_Tienkung
|
||
python3 rl_control_node_sim.py
|
||
|
||
控制端：
|
||
键盘控制：
|
||
cd tienkung-szu/Deploy_Tienkung
|
||
python3 udp_loopback/omnisoket_keyboard_sender.py
|
||
|
||
xbox:
|
||
终端1：
|
||
source /opt/ros/humble/setup.bash
|
||
ros2 run joy joy_node --ros-args -r joy:=/xbox_data
|
||
|
||
终端2：
|
||
cd tienkung-szu/Deploy_Tienkung
|
||
python3 udp_loopback/omnisoket_xbox_sender.py
|
||
|
||
# OmniSocket Integration
|
||
|
||
This repo now supports an OmniSocket-based control path alongside the original UDP loopback.
|
||
|
||
## Files
|
||
|
||
- `omnisocket_control.py`: binary control packet codec shared by sender/receiver.
|
||
- `omnisocket_keyboard_sender.py`: keyboard -> OmniSocket sender.
|
||
- `omnisocket_xbox_sender.py`: ROS2 `/xbox_data` -> OmniSocket sender.
|
||
- `omnisocket_fsm_controller.py`: OmniSocket receiver that converts packets into `ControlFlag`.
|
||
- `config/omnisocket_demo.yaml`: OmniSocket transport config template.
|
||
|
||
## Main-node integration
|
||
|
||
Set `control_tool: omnisocket_loopback` in `config/dex_config.yaml`, then run `rl_control_node.py` or `rl_control_node_sim.py`.
|
||
|
||
The main node will instantiate `OmniSocketFSMController`, which receives binary control packets and maps them into the same FSM commands used by the UDP loopback path.
|
||
|
||
## Sender usage
|
||
|
||
Keyboard sender:
|
||
|
||
```bash
|
||
cd Deploy_Tienkung
|
||
python3 udp_loopback/omnisocket_keyboard_sender.py
|
||
```
|
||
|
||
Xbox sender:
|
||
|
||
```bash
|
||
cd Deploy_Tienkung
|
||
source /opt/ros/jazzy/setup.bash
|
||
ros2 run joy joy_node --ros-args -r joy:=/xbox_data
|
||
python3 udp_loopback/omnisocket_xbox_sender.py
|
||
```
|
||
|
||
## Notes
|
||
|
||
- Install the `omnisocket` Python package before using this path.
|
||
- `omnisocket_xbox_sender.py` still reuses `config/dex_config.yaml` for Xbox axis/button overrides so it stays aligned with the existing repo configuration.
|
||
- The original UDP files remain unchanged, so you can switch back by restoring `control_tool: udp_loopback`.
|
||
- OmniSocket keyboard/Xbox mappings are aligned with the cleaned walk-only FSM flow: `ZERO`, `STOP`, and `WALKAMP`.
|
||
- Keyboard sender supports `4/5/6` for clearing `x/y/yaw` speed independently, and `r` still clears all three axes.
|